[Elecraft] Computer noise problem
Bozidar Benc
[email protected]
Mon Mar 24 14:02:01 2003
Thanks a lot for the reply.
I understand that a counterpoise changed things quite a bit, but what I
still don't understand is how it can suppress noise created by the PC, which
is 50 cm from K1 (and counterpoise is connected to the coax cable shield at
the antenna side).
> Unless you have taken steps at the transformer to suppress common
> mode current back onto the shield, the shield all the way back to
I forgot to mention that I have a choke (9 turns of RG58, some 30 cm
diameter) one end connected to the transformer and the other to the cable.
The choke was there all the time, before I added a counterpoise.
> the rig is part of the radiating antenna. Even grounding it at
> the antenna end cannot prevent this in all cases.
>
> Adding the counterpoise has changed this dynamic.
>
> There is nothing magic about coax that makes it per se immune to
> being part of the radiating system. Unless you have taken
> specific steps to block it, it IS part of the radiating system.
Yes, I know that coax is a part of the system, but I thought that it has
nothing with the noise created by the PC.
73, Bole
> 73, Guy.
>
> >
> > From: "Bozidar Benc" <[email protected]>
> > Date: 2003/03/24 Mon PM 12:43:53 EST
> > To: <[email protected]>
> > Subject: [Elecraft] Computer noise problem
> >
> > Hello,
> >
> > PC in my shack generated lot of noise on my K1, especially on 40 m band.
> > When I replaced PC's power supply with an older one, the noise decreased
> > almost by half.
> >
> > My antenna was 20m long wire with 10:1 transformer at the end, which is
> > connected to my K1 with 20 m of RG58 cable.
> >
> > Now the interesting part.
> > After I added a 10 m long counterpoise to the antenna, the
> noise from my PC
> > almost completely vanished!
> >
> > Does anyone have any explanation?
> >
> > Another question: Is it clever to ground my K1, and if it is,
> where on K1 is
> > the best place to connect ground?
> >
> > 73, Bole, 9A3RR
> > k1 #1499
> >
> > _______________________________________________
> > Elecraft mailing list: [email protected]
> > You must be a list member to post to the list.
> > Postings must be plain text (no HTML or attachments).
> > See: http://mailman.qth.net/mailman/listinfo/elecraft
> > Elecraft Web Page: http://www.elecraft.com
> >
>
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
>
>