[Elecraft] RE: Solder Joints

[Christopher L. Cowan]

I have built many circuit board projects & kits both professionally and for personal use over the years and have had virtually zero problem with solder joints.

The technique I use was taught to me by a very picky fellow a number of years ago:  

Solder the joint, clip the lead off then resolder with a very light touch and minimal solder to reliquify the joint.  

This allows you to "see" the joint again and get a very nice bead appearance.  I have never had problems with overheating of components but the technique must be quick.  I also use a magnifier.  After the second soldering you can inspect the board very carefully and you can clearly see any joints that have not been "cleaned up" with resoldering.

Chris Cowan KA0A/7

__________________________________________________________________
Try AOL and get 1045 hours FREE for 45 days!
http://free.aol.com/tryaolfree/index.adp?375380

Get AOL Instant Messenger 5.1 for FREE! Download Now!
http://aim.aol.com/aimnew/Aim/register.adp?promos=380455