[Elecraft] Another K@ frequency calibration technique

[Mike Harris]

G'day,

<snipo>
(If you have the KPA100 operating, it's 4 MHz clock may be interfering
with
you. If so adjust it to a higher frequency. Elecraft recommends this
to keep
it from interfering with signals at the top of the 75 meter band. The
frequency of the 4 MHz clock in the KPA100 is not critical and has no
effect
on any calibration).
<snipo>

And instead you can interfere with low level signals at the bottom of
the 10 metre band.

Take your pick.

Regards,

Mike VP8NO