[Elecraft] SN 3222 - K2 Built and running

[David Walker]

I've just finished building my K2 and everything seems to be fine at =
this point.

My Power out levels are:

10 W out on 80mx
12W on 40mx
15W on 30mx
7.5W on 20mx
12W on 17mx
10W on 15mx
10W on 12mx
8W on 10mx (7W on 28.715)

I'm pretty happy with it - but 20mx could be better.  I've peaked the =
L3's for all bands to get the peaks.

On LSB when I switch from FL1 to FL2 the reciever shifts down about =
600hz (so I have to tune up to find the signal. On CW the rx shifts up =
only a few hz when the FL2 filter is on.)

Switching between CW and CW-R I have to tune up about 1Khz to find the =
signal.

The reciever starts squeeling at 14.361.37 and stops abruptly at =
14366.37.  I'll need some advice on this from somebody who may know what =
may be the issue.

I have the KSB2 built and ready to put into the rig but I'll do that =
when I get my alignments right.

Thanks to all that helped me out with advice on this thing.

Dave
VK2ICQ


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---