[Elecraft] AGC K2 firmware suggestion.

Sun Mar 9 14:40:02 2003

This is an EXCELLENT suggestion!  Hate always guessing what the AGC mode is.

73 de NA8M
John

----- Original Message -----
From: "Kotarak" <[email protected]>
To: <[email protected]>
Sent: Sunday, March 09, 2003 2:08 PM
Subject: Re: [Elecraft] AGC K2 firmware suggestion.

> Hi!
> I think the off/on method is OK, but it will be cool if the AGC cycle
"AUTO,
> FAST, SLOW", where AUTO is FAST in CW and SLOW in USB/LSB? Should be
fairly
> easy fix in the firmware.
>
> 73s
> de KB1FZA
>
> ----- Original Message -----
> From: "Mike Harris" <[email protected]>
> To: "Mike" <[email protected]>; "Elecraft Reflector"
> <[email protected]>
> Sent: Thursday, March 06, 2003 4:49 PM
> Subject: Re: [Elecraft] K2 firmware suggestion.
>
>
> > G'day all,
> >
> > > Maybe this has come up before, but I can't find it...
> > > Is there any possibility, in the next firmware upgrade, to have the
AGC
> > > button cycle 'OFF, FAST, SLOW', instead of having to press PRE-ATT &
AGC
> > > together to turn the AGC off/on? Only a trivial thing, I know, but
would
> > > make things a bit more intuitive. Some other buttons allow more than
> > > 2-push-functions, so guess it is possible.
> >
> > A splendid idea.  Another much asked for facility is for VFO A and B to
> > remember the associated mode and filter settings.
> >
> > Now that the K2 box has pretty well reached the end of its development
(?)
> > it might be worth looking at some of these outstanding firmware
features.
> > It might be worth a poll to see just how much some of the operational
> > features are used by the masses. A questionnaire on the Elecraft site
> would
> > do it.  I for one would happily free up some memory by shortening or
> > reducing the number of CW memories.  That way an extra 1K could easily
(?)
> > be found.
> >
> > There could be scope for two firmware options even.
> >
> > Regards,
> >
> > Mike VP8NO (IOTA SA-002)
> > GQRP 10148
> > K2/100 #1400
> >
> > _______________________________________________
> > Elecraft mailing list: [email protected]
> > You must be a list member to post to the list.
> > Postings must be plain text (no HTML or attachments).
> > See: http://mailman.qth.net/mailman/listinfo/elecraft
> > Elecraft Web Page: http://www.elecraft.com
>
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
>
>