[Elecraft] KAT100 won't talk to DX4WIN

[Rich Lentz]

Assuming everything is wired properly, do you have the right plug in the
right socket?

The End one (on the short cable) goes to the KAT100, The one in the middle
goes to the K2/100, and of course the end one on the long cable goes to the
PC (that is the only thing it will fit.  If the two for the KAT100 and
K2/100 are switched, you can still control the KAT100, but the PC interface
will not work _ there are no wires going where they are supposed to go.

If they are plugged in properly, then I would re check the wiring of the
connectors.

Rich

KE0X
-