[Elecraft] k2 mic pinouts needed also how to find pin numbers

[Gary Lee]

Here I go again.

Got a chasis mount 8-pin type mic connector, the necessary cap, resistors,
and an rs headset/mic combo.  Going to try George Franklin's setup for this
headset.

However, don't know the pinout on the mic connector.
My k2 is set up for the kenwood mic.  I have used both the mc43 and mc47
mics successfully.

Looked in the manual of my ts2000, but no joy there.  Also looked in the
ksb2 manual, but, like most others, the tables for mic connections got
bacly scrambled in the text conversion process.

Could someone send me these please?

Also, which pin is which on the connector?  There is a space at the top,
with seven pins around the circle, and one central pin.

Thanks for the help guys.  I'm gust going to build a little box with the
propper pins broken out and soldered to standard 1/8 inch jacks.  That way
I don't have to mess with those little bitty wires in the headset cord.

Thanks again all for the help.

Gary Lee
kb9zuv
	


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.443 / Virus Database: 248 - Release Date: 1/10/03


--- StripMime Report -- processed MIME parts ---
multipart/mixed
  text/plain (text body -- kept)
  text/plain (text body -- kept)
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---