[Elecraft] DSP usage

[Dave]

Vic

My settings were originally different to the default, but I've since
adjusted them back to 89 and 30. I usually run with CF1 as low pass, CF2 to
CF4 around the bandwidth of my XFIL settings. I haven't found the soft
filter settings of use (so far), these are the settings with a lower case
"c". De-noiser, when used, is usually only at the "1" setting. The audible
noise reduction seems, to my hearing, to be a reduction of about half on
background noise (low level "frying" type band noise).

Hope that helps.

Dave, G4AON

----- Original Message ----- 
From: "Vic Rosenthal" <vic@rakefet.com>
To: "Elecraft" <elecraft@mailman.qth.net>
Sent: Tuesday, July 22, 2003 4:20 AM
Subject: [Elecraft] DSP usage


> Regarding the KDSP2 on CW: I'm wondering if anyone has
>
> 1) Found the nr2 - 4 positions useful.  It seems to me that the nr1
> setting is always optimal.
>
> 2) Found a better adjustment for beta and decay than the default.  If
> you have, could you explain how it helps, or what kind of signal it
> helps with?
>
> Vic K2VCO