[Elecraft] Need Help

[Doug Faunt N6TQS +1-510-655-8604]

   From: "Lou Roux" <w6ur@bak.rr.com>
   Date: Mon, 7 Jul 2003 17:44:55 -0700

   Hi guys,

   I've been working away on K2 #3578 and all was going well until this problem
   arose. In the alignment and test, part 2 page 57, using CAL FCTR on the 4
   MHz calibration all is well. Then on to the VCO test with the probe in TP1
   the manual states there should be a counter reading in the 8 to 10 MHz range
   BUT I get 0000.00. The counter probe seems to be working so I'm stymed.
   Where should I start looking???

I have the same problem, so please copy us both, or the whole list.

I bought prewound toroids, and have checked continuity across them all
from pad to pad.

73, doug