[Elecraft] KIO2 Test anomoly?

Mon Jul 7 10:23:01 2003

All is well,

I gave it one more try and it works as advertised. I was not leaving the
K2 in the secondary menu, with "Port ON" showing. Hey it was late last
night when I tried it! :-)

73, Rod N0RC

----- Original Message ----- 
From: "N2TK, Tony" <[email protected]>
To: "'Rod N0RC'" <[email protected]>; <[email protected]>
Sent: Monday, July 07, 2003 7:24 AM
Subject: RE: [Elecraft] KIO2 Test anomoly?

...
> Did you tap MENU, tap DISPLAY, go to PORT, hold in EDIT then tap
DISPLAY to
> send a test message?
> N2TK, Tony
> #3481
>
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]]On Behalf Of Rod N0RC
> Sent: Monday, July 07, 2003 09:02
> To: [email protected]
> Subject: [Elecraft] KIO2 Test anomoly?
>
> Folks,
>
> The first test of the KIO2 communication functionality,  From
> Page 14 of the KIO2 Manual, is:
>
> "If a K2-compatible application program is not available, you can
> test the serial interface using a terminal program such as
> Hyperterminal, as follows:"
>
> ... <setup/radio control instruction deleted>
>
> "3. Tap DISPLAY to send a test message from the K2 to the
>     computer. The string FA000xxxxxxxx; should be seen in the
>     terminal program window, where xxxxxxxx is the present VFO A
>     frequency in Hz. (The first "x" will be 0 if VFO A is set to
>     a frequency below 10 MHz.)"
>
> ...
>
> I was never able to make this test work. However THE KIO2 WORKS
...