[Elecraft] KI02 Interface software

[Dave]

Tom and Gang

You might try BeaconSee: http://www.ip.pt/coaa/beaconsee.htm

And Logger: http://www.qsl.net/kc4elo/

They are both free and work well on the K2. Bev, the author of BeaconSee has
some K2 specific commands that I forwarded, having changed PCs at this end I
lost the e-mail and settings. Kenwood commands will work but beware of
needing to use VFO A on the K2 otherwise it changes band but doesn't set the
correct frequency. Logger has the same issues with VFO A/B.

73's Dave, G4AON
K2 #1892

----- Original Message -----
From: "Tom" <thom2@worldnet.att.net>
To: <Elecraft@mailman.qth.net>
Sent: Tuesday, January 21, 2003 1:26 AM
Subject: [Elecraft] KI02 Interface software


> Hi Gang,
>
>   I just read the QST review of the TRX-Manager (I think) rig control
> software and was wondering what the guys on this list were using with the
> K2.  I installed the KI02 a while back and downloaded a software package
> that was listed on the site to run it.  I am pretty satisfied with the job
> it is doing.
>
>   The TRX - manager is priced at about $70 and seems to have a lot bells
and
> whistles (including a SWL feature which wouldn't be too useful on the K2).
>
> Any feedback as to what software you are using or any experience with the
> K2/TRX combo would be appreciated.
>
> Thanks in advance for your input.
>
> 73
> de Tom McCulloch
> WB2QDG