[Elecraft] K2 s/n 3021 Display Board:

Thu Jan 2 13:11:02 2003

This a misprint left over from the Rev A board the reading you are getting
is ok

Don Brown
KD5NDB


----- Original Message -----
From: "Martin AC6RM" <[email protected]>
To: <[email protected]>
Sent: Thursday, January 02, 2003 10:49 AM
Subject: [Elecraft] K2 s/n 3021 Display Board:


> Hello;
>
>    I am part-way through assembling K2 s/n 3021.  The resistance checks
> detailed on page 27 of the manual all checked out okay except for J1
> pin 3.  This is supposed to be ground, but I get a high impedance
> (>1M).
>
>    I continued on with construction despite the failure and all tests
> shown on pages 41 through 46 passed.
>
>    Any ideas?  Seems a ground connection would be a trace issue (or maybe
> a diode issue -- I double-checked the polarity on all my diodes).
> There is conductivity through the connector itself, just not to ground.
>  What did I do wrong?
>
>    Thanks ES 73,
>
>    Martin
>
>
>
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
>