[Elecraft] RP3 Front Panel Parts Subsitution?

Wed Jan 1 18:45:03 2003

It sounds like it is a replacement...but if you look at the schematic and
see how the Resistor pack is used you can go and measure the pins to make
sure it is what it is supposed to be.

Gregg R. Lengling, W9DHI
PSYCHOLOGY:  The science of inventing words for things that do not exist.

----- Original Message -----
From: "Carl J. Denbow" <[email protected]>
To: "Reflector Elecraft" <[email protected]>
Sent: Wednesday, January 01, 2003 5:29 PM
Subject: [Elecraft] RP3 Front Panel Parts Subsitution?

I'm building a K2 (3000 series) and am now putting together the front
panel assembly.  I'm at the very end of this process, where you are
told if you have the SSB kit that you should complete the placement
of the relevant SSB parts on the front panel board.  In checking the
parts with those listed in the SSB kit manual, I find one discrepancy
that I'm concerned about.

The manual calls for part# 77083103, but the only RP not otherwise
accounted for is part# L83C103 151

MY QUESTION:  IS THIS AN EQUIVALENT PART?

Tnxs for your prompt attention to this question, as I'm foregoing
football (or most of it) to spend time building.

73

Carl

--
Carl J. Denbow, [email protected] on 1/1/2003

_______________________________________________
Elecraft mailing list: [email protected]
You must be a list member to post to the list.
Postings must be plain text (no HTML or attachments).
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com