[Elecraft] EQP Power divisions explained

[k6iii@juno.com]

Well, the intent of the power division rule is this:

0 to 5.0w gets you 3 pts per QSO
5.1w to 10.0w gets you 2 pts per QSO
10.1 to 100.0w gets you 1 pt per QSO
Over 100w gets you nothing!

I am gonna use what the power meter on my K2 sez I am running. Will set
it to 5.0w and take 3 pts per Q. I know, some of you are gonna say that
the K2 power meter is not accurate enough. Well, I'm not that much of a
purist. I set it up per the manual and I figure that's good enough for
this activity. Besides, I don't have any other way of measuring power.

Remember this is all run on the honor system and you're supposed to have
fun with this activity. Its NOT a Sprint! Take minute to say 'Thanks' and
so forth.... greet you contact by name if you remember it.  Be friendly
and enjoy.

de Jerry/k6iii
San Jose, CA

---------------------------------------------------

On Friday, February 28, 2003, at 12:47  PM, Rod N0RC wrote:

> Gang,
>
> The rules state:
>
> Scoring:
> 1. 3 points for each qso using 5 Watts or less cw (10 Watts or less 
> SSB)
> 2. 2 points for each qso using 6 to 15 Watts cw , 11 Watts to 15 Watts
> SSB)
> 3. 1 point greater than 15 Watts.
>
> How many points for Pout greater than 5W but less than 6W?

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---