[Elecraft] K2:problems with frequency changing

Mon Feb 24 18:51:00 2003

Ah, another example of GDI.  This used to be a frequent problem back in the 
early days of automatic garage doors, but I haven't encountered it of late. 
Thanks for the restimulation.

best wishes,

dave belsley, w1euy

--On Monday, February 24, 2003 4:31 PM -0600 "Gregg R. Lengling" 
<[email protected]> wrote:

> I don't have the answer...but it's better than my problem.  If I tune the
> KAT100 autotuner on 7,258...my garage door opens......I have to remember
> that when I'm on 40 meters or the door stays open all night.
>
> Gregg R. Lengling, W9DHI
> K2/100 SN 3075
> ----- Original Message -----
> From: "Krzysztof Piotrowski" <[email protected]>
> To: <[email protected]>
> Sent: Monday, February 24, 2003 2:23 PM
> Subject: [Elecraft] K2:problems with frequency changing
>
>
>> Hi,
>>
>> I have one problem with my K2. Generally it works OK but from time to
>> time I can't change frequency (even when on ham bands)  rotating the
>> main knob (and it is not the matter of pressing the LOCK button). If
>> this unwanted lock takes place it is possible to change frequency:
>> - by direct entry,
>> - using RIT (within RIT range),
>> - by violent turning of main knob (but it takes some time).
>> Working in many contests I find this K2 behavior very unconvinient.
>>
>> Thank you for any sugestions.
>>
>> 73
>> Kris, SP9NSV
>> Krakow, POLAND
>> ([email protected])
>>
>> K2 # 3143
>>
>> PS
>> I will not be able to check your sugestions as I am seperated from my K2
>> till the end of this week.
>>
>>
>> --- StripMime Report -- processed MIME parts ---
>> multipart/alternative
>>   text/plain (text body -- kept)
>>   text/html
>> The reason this message is shown is because the post was in HTML
>> or had an attachment.  Attachments are not allowed.  To learn how
>> to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
>> _______________________________________________
>> Elecraft mailing list: [email protected]
>> You must be a list member to post to the list.
>> Postings must be plain text (no HTML or attachments).
>> See: http://mailman.qth.net/mailman/listinfo/elecraft
>> Elecraft Web Page: http://www.elecraft.com
>
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com

----------------------------------
David A. Belsley
Professor of Economics