[Elecraft] K2 IF use at 24.1MHz for W1GHZ XVTR

Sun Feb 23 13:51:03 2003

Except the QST article mentions that the transverter requires a wider IF
range than the 12 meter band.  So unless the K2 will transmit beyond the
band, I think there will be the same range limitations as would be the
case with most other HF transceivers which have not been modified for
out of band ops.  The 222 band is simply too broad to be tuned by an
unmodified HF rig being used as the IF.

Bruce - W8FU

-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Ron D'Eau Claire
Sent: Saturday, February 22, 2003 1:10 PM
To: 'Mark S. Adams, P.E.'; [email protected]
Subject: RE: [Elecraft] K2 IF use at 24.1MHz for W1GHZ XVTR

My K2 transmits fine at 24.1

Ron AC7AC
K2 # 1289

-----Original Message-----
Hi Gang,

As I await my new K2 I am wondering. Will it transmit at 24.1MHz?  I
just 
built the W1GHZ 222MHz transverter from QST ( info at www.w1ghz.org ) 
Thanks and 73,
Mark K2QO

_______________________________________________
Elecraft mailing list: [email protected]
You must be a list member to post to the list. 
Postings must be plain text (no HTML or attachments). 
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com