[Elecraft] Allignment and Test Part 1

Mon Feb 17 05:56:00 2003

Jason -

I could only get mine to 3.830 volts.  Called the boys and they said it was
not a problem.  While the manual said 3.9 volts, a little lower makes it a
little more sensitive.

73 de NA8M
John

----- Original Message -----
From: "Jason Lehmann" <[email protected]>
To: <[email protected]>
Sent: Sunday, February 16, 2003 10:39 PM
Subject: [Elecraft] Allignment and Test Part 1

> Hi all,
>
> My K2 #3211 has been going together without trouble so far.  I finally had
the chance to apply power tonight!  Wow, it's finally starting to look like
a radio even though it won't hear any signals at this point!  Anyway, the
setting of the AGC voltage has come up slightly shy of the recommended
voltage.  I can reach a max of 3.849.  Is this ok or do I need to have some
swing above that?  Unfortunately, I don't remember the lowest voltage
attainable but if needed I can retest it.  Any thoughts?
>
> Thanks,
>
> Jason
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment.  Attachments are not allowed.  To learn how
> to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
>
>
>