[Elecraft] fluctuating power KPA100

Wed Feb 5 09:13:01 2003

I believe you need only hit DISPLAY and TUNE together to achieve this end. 
You need not go to the voltage reading.

best wishes,

dave belsley, w1euy

--On Wednesday, February 5, 2003 6:11 AM -0700 Bruce Thompson 
<[email protected]> wrote:

>
>
>> When I initially place the radio in tune with the power control set at
>
>> max the radio only puts out 20 watts. If I turn the power control down
>
>> the
> power
>> out increases to the proper level. This happens on all bands.
>>
>> Any ideas?
>>
>> Gregg
>
> Another way to use the TUNE button to get max power out (or whatever the
> power control is set to) is to press DISPLAY until the voltage is shown.
> Now you can hit TUNE and it will output whatever power has been set.  I
> find this a lot easier than hitting TUNE then turning a pot to test, for
> example, external amplifiers.
>
> Bruce KG0SH
> Golden, CO
>
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment.  Attachments are not allowed.  To learn how
> to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com

----------------------------------
David A. Belsley
Professor of Economics