[Elecraft] K2 # 3877 is ALIVE!

[Don Wilhelm]

Dave,

Yes, I believe an alignment of the filter/BFO relationships is in order - it
is really easier to do than to describe.  If you have questions about how to
do that, take a look at my webpage www.qsl.net/w3fpr article on K2 dial
calibration (Step 3 covers the CAL PLL part).  There are links there to
additional information that may be helpful.

73,
Don W3FPR

----- Original Message -----

Only one small anomaly: When receiving a signal and different filters are
selected, the signal changes frequency from .5 to 2 KHz. It must then be
retuned.

Haven't done Spectrogram, yet.will this correct the problem of the receive
signal changing with a filter change? Or is there another alignment I should
rework?