[Elecraft] PLL Range and a problem when in TUNE.

[Matthew J. Wolf]

It's a base K2.        =20
                                                                           =
                            =20
Also john w1rt recommend removing and rewinding T4:                        =
=20
	Having just been there, I'd recommend removing and rewinding T4. I        =
                     =20
	believe the links were causing the problem, I ended up putting them in=20
	*before* installing the transformer, keeping the routing pretty similar=20
	on both sides and generally keeping everything as symmetric as possible.=
=20

I admit that I may have mis-wound T4.
                                                                           =
                            =20
-Matthew KC9DQP                                                            =
     =20

On Thu, Dec 25, 2003 at 03:40:14PM -0800, Ron D'Eau Claire wrote:
> Is this a K2/100?=20
>=20
> Ron AC7AC
>=20
> -----Original Message-----
> I'm a little worried because when I set the power output above 1 watt on =
40
> meters and enter the TUNE mode my K2 pulls 5 amps. Also the measured outp=
ut
> while the above happens is around 19 watts. What should I do to try to fi=
nd
> the cause of this problem.
>=20
> Any comments would be welcomed.
>=20
> - -Matthew Wolf (KC9DQP)
>=20
>=20

--=20
------------------------------------------------------------------------
         Matthew J. Wolf                    mwolf@speciosus.net
 ----------------------------------------------------------------------
 PGP Key Fingerprint: 2534 D547 3F4B 45D0 70A6 468A A326 F3CB 0B12 861B
------------------------------------------------------------------------
"Machinemakers always run the risk of becoming total machine. Machines=20
always fail... given time. And when these machines failed there would be
nothing left." -God Emperor of Dune, by Frank Herbert


--- StripMime Report -- processed MIME parts ---
multipart/signed
  text/plain (text body -- kept)
  application/pgp-signature
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---