[Elecraft] K2 Filter adjustment - jumpy BFO

[Kelly McDonald]

Hello all,

I'm at the second test an alignment with my K2 # 3879. Pretty much
everything checks out, including all of the BFO range tests (high 4917.5
low 4911.5)

However, when I go to adjust the bfo for the filters, it acts rather
'jumpy' when I tune below 4913.4, for example it will jump down to 4907
and later even 4889 or so. Tuning it up higher (example 3914.1 for the
cw rev) is nice and smooth and just as I would expect it.

I didn't find much in the troubleshooting manual, or searching through
the list archives.

Any suggestions?

Thanks,
Kelly McDonald 
W4KPM


-- 
Kelly McDonald <w4kpm@adelphia.net>