[Elecraft] Elecraft MD-2 mic resistor
Kenneth E. Harker
[email protected]
Thu Dec 11 10:57:08 2003
On Thu, Dec 11, 2003 at 10:33:50AM -0500, Don Wilhelm wrote:
> And that is the way I do it on my personal mics (I use several mics with my
> K2) - but the resistor is a tight fit in the plug housing. Building up an
> adapter is another way to accomplish that feat, and may be the only way if
> one is using a particular mic for several transceivers.
I added the resistor to the microphone instead of the radio, too. I used an
1/8W 5.6K resistor instead of the 1/4W 5.6K resistor that came with the MH2 -
that makes the mod easier (it's still a tight fit, even so):
http://www.wm5r.org/k2-100/microphones.shtml
> When I build for others, I am more inclined to follow the directions more
> closely so that others can still use the published documentation. In this
> particular case, I did not have the mic available, so I could not put it
> into the plug anyway - the resistor went on the back of the mic connector.
>
> 73,
> Don W3FPR
>
> ----- Original Message -----
>
> > > Those of us who hate to the idea of customizing the rig for a particular
> > > mike have installed this resistor in the connector at the end of the
> mike
> > > cord.
> >
> > Amen. That's where it should be.
> >
> > 73,
> > Ed - W0YK
> > _______________________________________________
> >
>
>
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be subscribed to post to the list.
> To subscribe or unsubscribe see: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
> Also see: http://www.elecraft.com/elecraft_list_guidelines.htm
--
----------------------------------------------------------------------------
Kenneth E. Harker "Vox Clamantis in Deserto" [email protected]
University of Texas at Austin Amateur Radio Callsign: WM5R
Department of the Computer Sciences Central Texas DX & Contest Club
Taylor Hall TAY 2.124 Maintainer of Linux on Laptops
Austin, TX 78712-1188 USA http://www.cs.utexas.edu/users/kharker/
----------------------------------------------------------------------------