[Elecraft] Elecraft MD-2 mic resistor

[Don Wilhelm]

And that is the way I do it on my personal mics (I use several mics with my
K2) - but the resistor is a tight fit in the plug housing.  Building up an
adapter is another way to accomplish that feat, and may be the only way if
one is using a particular mic for several transceivers.

When I build for others, I am more inclined to follow the directions more
closely so that others can still use the published documentation.  In this
particular case, I did not have the mic available, so I could not put it
into the plug anyway - the resistor went on the back of the mic connector.

73,
Don W3FPR

----- Original Message -----

> > Those of us who hate to the idea of customizing the rig for a particular
> > mike have installed this resistor in the connector at the end of the
mike
> > cord.
>
> Amen.  That's where it should be.
>
> 73,
> Ed - W0YK
> _______________________________________________
>