[Elecraft] KBS2 Capacitor Height
Fernando Quinones
[email protected]
Mon Dec 8 15:14:00 2003
Hello to all.
I have a question that was asked awhile back concerning the capacitor
height on the SSB board.
However, I didn't find the answer if one was given. I have emailed the
poster
but the email bounce, hence this query.
The Picture of the KSB2 SSB Adapter on the Elecraft page to these eyes
seems that all capacitors are nicely snug on the board, particularly
around the xtals.
Strengthening those little blue thingys legs is problematic for these
forcefully hands.
Here is the question previously posted in 2000 by ab6gy.
<<<<<<<<<
Hello to the group,
Just started the KSB2 SSB Adapter for S/N 01451. The assembly
instructions state that "the leads on the small capacitors do not need to be
straightend, but keep their mounted height at about 1/8" or less.
Here's the question; Is this the height to the top of the capacitor or
the capacitor lead height above the board? I find it somewhat difficult to
attain the 1/8" height recommendation without straightening the leads.
>>>>>>>>>
tnx to all.
--
73's Fernando NF6Q/NNN�JYM
San Jose,CA. 95123
Elecraft K2 #233�;KBT2;KAT2;KNB2;KIO2;KAF2
CCA #�1187 FISTS #8649 FP #622 QRPI #11612
<http://pages.sbcglobal.net/nf6q>