[Elecraft] KX1 Parts

[K2PQ]

Sander,

I haven't started building yet but I looked further in the manual because it
was confusing. The leads on my C45 and C56 were about the same spacing. On
page 33, first step, it mentions C45 may be a larger disk type. It further
states the disc would not fit in location C56.

Frank.... K2PQ

From: "Sander Wissing" <zr6sw@icon.co.za>
Sent: Monday, December 01, 2003 12:13 PM
Subject: [Elecraft] KX1 Parts


> Me again,
>
>
>
> I have received the following capacitors for C 45 and C56.
>
>
>
> One is a Disk type cap, with legs coming out straight at the bottom, the
> other is a small blue one, similar to C3, C5, the 103 and 104 ones.  The
> difference should be in the leg spacing, and the blue cap's legs is
> slightly further apart than the disk.  But all the other blue caps are
> similar to this one, and their spacing is given as 0.1, not 0.2.  So,
> does it matter which is which?  And if so, which is which?
>
>
>
> Thanks
>
>
>
> (Busy soldering!)
>
>
>
> Sander Wissing
>
> ZR6SW