[Elecraft] RE: K2 Dial Calibration Information

[Don Wilhelm]

Thanks Wayne.  I will update my pages to reflect that information.

One question remains - will changing the filter width write both BFOs
associated with that filter to the table or only the one for the sideband
selected?

73,
Don W3FPR

----- Original Message -----

| Changing either the filter bandwidth or BFO setting will trigger a
re-count/save
| of the present BFO frequency. I'll clarify the manual on this point on the
next rewrite.
|
| 73,
| Wayne
| N6KR
|
|
| > -------- Original Message --------
| > Subject: Re: [Elecraft] RE: K2 Dial Calibration Information
| > Date: Thu, 7 Aug 2003 14:52:29 -0400
| > From: "Don Wilhelm" <w3fpr@peoplepc.com>
| > Reply-To: "Don Wilhelm" <w3fpr@peoplepc.com>
| > To: "Wallace, Andy" <awallace@mc.com>
| > CC: "Elecraft" <elecraft@mailman.qth.net>
|
| > Andy,
| > The information I have understood is that the firmware does not write
the
| > BFO values until the BFO frequencies are actually changed - on that
basis,
| > changing the filter bandwidth would only write the new filter bandwidth
to
| > the table, but not the BFOs.
| >
| > I may have understood incorrectly all this time, but until Wayne tells
me
| > differently, I will continue with that assumption.
| >
| > If you were successful - have you considered that it may have worked
'just
| > because'?
| >
| > 73,
| > Don W3FPR
| _______________________________________________
| Elecraft mailing list: Elecraft@mailman.qth.net
| You must be subscribed to post to the list.
| To subscribe or unsubscribe see:
http://mailman.qth.net/mailman/listinfo/elecraft
| Postings must be plain text (no HTML or attachments).
| Elecraft Web Page: http://www.elecraft.com
|
|