[Elecraft] Re: AGC adjustment

[Daniel Reynolds]

Could I get equally pleasing S-Meter results if I left my AGC set for 3.8 Volts
(as instructed in the manual) and re-adjusted CAL S HI for the 9 o'clock
position?

I may try this when I get home tonight...

- Daniel/AA0NI
K2 #3421

--- Sverre Holm - LA3ZA <la3za@qsl.net> wrote:
> 2b. Then adjust CAL S HI by setting RF GAIN to the 9 o'clock position
> (instead of fully CCW) and set parameter so that right-most bargraph is
> barely turned on. I have played with various other setting such a 10, 11
> o'clock, but found the 9 o'clock position to be fine. It also agrees
> reasonably well with 50 uV from my generator to give S 9.