[Elecraft] K2 - external amp bandpass filter kit

Tue Apr 22 20:02:01 2003

In a message dated 4/22/03 7:37:17 PM Eastern Daylight Time, 
[email protected] writes:

> Subj: RE: [Elecraft] K2 - external amp bandpass filter kit 
>  Date: 4/22/03 7:37:17 PM Eastern Daylight Time
>  From: <A HREF="mailto:[email protected]">[email protected]</A>
>  To: <A HREF="mailto:[email protected]">[email protected]</A>
>  Sent from the Internet 
> 
>   I'm in the process now of building up a amp with the filters form CCI , 
> The only change I made is to sub 2sc2879 finals for mrf 454"s . The 2879's 
> are 120 watt devices. The cost for the entire project for a 200 watt amp 
> that requires about 4 or 5 watts drive is far less than the 100 watt 
> module. 73 Sam KF4YOX
> 
> CCI sells them too for their amplifier modules. Rated at 300 watts. The 
> come
> in kit form for about $13 for each HF band. See:
> http://www.communication-concepts.com/filters.htm
> 
> Ron AC7AC
> K2 # 1289
> 
> -----Original Message-----
> There are single band bandpass filters made and sold in U.S.
> 
> See the ads in back of the ham magazines, I think QST in particular. They
> are stand alone per band units.  Not switched. 73, Stuart K5KVH
> 
> 
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list. 
> Postings must be plain text (no HTML or attachments). 
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
> 

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---