[Elecraft] K1 Voltage Check Problems

Mon Apr 21 17:40:02 2003

Have you installed the jumper?
The errata sheet tells you to install a jumper in place of rfc8.
At least I think it was rfc8!
73 Tom LA1PHA K1 #1491
----- Original Message -----=20
From: "Eric Stover" <[email protected]>
To: <[email protected]>
Sent: Sunday, April 20, 2003 6:33 AM
Subject: [Elecraft] K1 Voltage Check Problems


>=20
> I'm building the K1-4 right now,  and got to the voltage check on pp. =
30 of
> the manual and am having a problem.  Test on P1 pin 15 show no volts, =
16
> shows what it should, U3 pin 5 shows no volts, and U3 pin 6 show no =
volts.
> Not sure where to start.  Any suggestions anyone?
>=20
>=20
> --- StripMime Report -- processed MIME parts ---
> multipart/mixed
>   text/plain (text body -- kept)
>   application/ms-tnef
> The reason this message is shown is because the post was in HTML
> or had an attachment.  Attachments are not allowed.  To learn how
> to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.=20
> Postings must be plain text (no HTML or attachments).=20
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com