[Elecraft] O-scope Question

Thu Sep 26 20:21:01 2002

Hi

Tek usually added a "A" to the model number when some improvement is made=
 to the design. I would go for the one with the largest serial number bec=
ause it is the newest. Tek serial numbers start at B010001 where the B me=
ans it was manufactured in Beaverton OR and they are consecutive numbers.=
 The CRT is the main concern and a higher serial number most likely would=
 have fewer hours on the CRT. =20

Don Brown
KD5NDB

formally a field instructor for Tektronix =20

----- Original Message -----
From: [email protected]
Sent: Thursday, September 26, 2002 6:26 PM
To: [email protected]
Subject: [Elecraft] O-scope Question

I have available very inexpensively either a Tektronix 2235 or a
2235A model. Which one would I prefer and why? Both seem
to work fine. Both are government surplus. One has a calibration
sticker from August last year and the other from the year previous.
TIA.  Geoff, K6TFZ

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---
_______________________________________________
Elecraft mailing list: [email protected]
You must be a list member to post to the list. =20
Postings must be plain text (no HTML or attachments). =20
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---