[Elecraft] K1 End-Fed Wire Antenna Recommendations

Wed Sep 25 15:27:01 2002

Go to a reputable radio supply house and get a Pomona BNC to binding posts adapter.
Radio shack sells one, but the quality is "so-so" as it's made in China or Taiwan.
I bought a couple of those and was very disappointed with them.  They don't compare
quality wise with the Pomona ones! Don't forget you need some sort of a
"counterpoise"
or at least one radial hooked to the ground post of the adapter!  This is assuming
you
have the KAT1 tuner card installed?
73,
Sandy W5TVW

----- Original Message -----
From: "Janet Beckett" <[email protected]>
To: <[email protected]>
Sent: Wednesday, September 25, 2002 10:29 AM
Subject: [Elecraft] K1 End-Fed Wire Antenna Recommendations

| Just finished #1265 and wanted some recommendations on the best way to
| hook up an end-fed wire antenna directly to the BNC connector.  Any
| suggestions?
|
|
|
| Alan
|
| KL1HC
|
|
|
|
|
|
|
|
|
| --- StripMime Report -- processed MIME parts ---
| multipart/alternative
|   text/plain (text body -- kept)
|   text/html
| The reason this message is shown is because the post was in HTML
| or had an attachment. Attachments are not allowed.
| Please post in Plain-Text only.---
| _______________________________________________
| Elecraft mailing list: [email protected]
| You must be a list member to post to the list.
| Postings must be plain text (no HTML or attachments).
| See: http://mailman.qth.net/mailman/listinfo/elecraft
| Elecraft Web Page: http://www.elecraft.com
|
|