[Elecraft] Re: K2 $ Rigblaster

[Robert C. Abell]

Michael,
You do not need a serial cable from your Rigblaster to the K2. The
serial cable connects between the Rigblaster and your computer.
The Mic Out jack on the Rigblaster connects via a cable to the Mic input
connector on the front panel of the K2.
A 3.5 mm 1/8" stereo cable is connected between the computer's speaker
line "out" to the Rigblaster's audio "out" jack.
Finally a 3.5 mm 1/8" stereo cable connects from computer sound card
line out to the Rigblaster audio "in" jack.

Also you need a stereo 1/8" cable from the computer's line input to the
K2's headphone front panel jack.

Good luck!

Bob,  VE3XM