[Elecraft] torroids

Tue Sep 3 13:20:01 2002

Yes!  A different gauge of wire will result in more or less turns to obtain
the same inductance as with the proper size wire.  If you must compromise,
it's a good idea to have an inductance meter to verify correct inductance.
The other option is to wind it as per instructions, then install.  If it is
not correct, add a winding first to see if things improve.  If not then
remove a winding.  Make sure you add a winding first cause you can't get
that winding back if you were to remove it first.

Cheers,
Robert
VE3RPF

----- Original Message -----
From: "kg4dni" <[email protected]>
To: <[email protected]>
Sent: Tuesday, September 03, 2002 11:06 AM
Subject: [Elecraft] torroids

> Hi,
>
> In the Elecraft manual L33 on the RF board, does it matter if the enamel
wire is #28 instead of #26?
>
> Daniel
>
> ___________________________________________________________
> TruthMail ...changing email forever!   http://www.truthmail.com
>
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com