[Elecraft] KAF2 RTC problem

David A. Belsley [email protected]
Tue Sep 3 11:32:03 2002


Steve: remember, you can only set the clock/date functions directly after 
turning the K2 on.  Once you've done other things, the clock locks as a 
safety feature.  So turn the K2 on, the go directly to the menu and set the 
clock/time.

best wishes,

dave belsley, w1euy

--On Monday, September 2, 2002 11:47 PM -0400 Steve Holton 
<[email protected]> wrote:

> After some excellent on the air experience with K2 #2646 in June, I have
> returned after a "real life" break to putting in more add-on modules. I
> installed the KAF2. The filter functions seem to perform as expected.
> Band-pass filter adjustments  using spectrogram were a snap. The RTC
> seems not to be as happy. I can turn on the RTC from the sec menu and I
> can enter the clock setup and I can get the 01.01.01 and 1-1-01 displays
> but can't set the clock. I read and re-read the sequences and tried it a
> number of times. Nothing will change the date. The time isn't advancing
> (if it's supposed to)... I always get 01.01.01 when I power on. I checked
> all the usual suspects, soldering etc all looks fine , but the voltage
> checks don't all pass muster. In particular:
> U2 pins 15 & 16 are supposed to be ~3V but are more like 0.4V - but I
> suspect this is OK as this is the PICs resonator and the PIC seems to be
> working - else I wouldn't get as far as I did - I believe. However, U2
> pin2 and U3 pin 1 - which are tied together should be 6V and are zero and
> U2-17 and U3-7 which are also tied together should be zero and are 6V
> Both U2 and U3 are installed with the correct orientation. ( U3 the RTC
> is has an alternate marking - 7660D/JRC/2001C instead of NJU6355ED, but I
> verified that this was OK with Gary in June) The PIC is KAF 1.00. Any
> thoughts, suggestions??
> Thanks,
> Steve N1NB
>
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list. Postings must be plain
> text (no HTML or attachments). See:
> http://mailman.qth.net/mailman/listinfo/elecraft Elecraft Web Page:
> http://www.elecraft.com



----------------------------------
David A. Belsley
Professor of Economics