[Elecraft] "The Toroid Guy" is great!

Mon Oct 28 14:33:00 2002

I can echo this comment of Tim's.

I think there's a case to be made that an Elecraft kit-builder should =
know how to wind a toroidal device - that way you will know what you are =
looking at when you're examining a device.  I learned how on the NorCal =
40A and the Sierra.  But once you know how you can see that there are =
ways to do it better - "The Toroid Guy" has figured out exactly that.

I have purchased toroids from him for both the K1 and K2, have checked =
every one of them against the assembly manual for the kit under =
construction, and have always found them to be exactly what was required =
by the Elecraft instructions.  The leads are prepared well, and Mychael =
has always proven to be VERY responsive in the 1-2 cases where I had a =
question.

This is the way to go.  There are purists out there who will insist on =
"rolling their own."  More power to them.  For the rest of us, there's =
"The Toroid Guy."

Mike - W1MU

 -----Original Message-----
From: 	[email protected] [mailto:[email protected]]=20
Sent:	Monday, October 28, 2002 8:57 AM
To:	Elecraft Reflector
Subject:	[Elecraft] "The Toroid Guy" is great!

Hi folks - Although I wound all the toroids when I built the K1 and the =
K2, I used Mychel "The Toroid Guy" for the KPA100 and just got in a set =
for the KAT100.  Toroids don't bother me - I just want to save more time =
for operating.  My 2 cents worth: he is fantastic!. Not only does he =
send me a thank you note for repeat business but the new toroids were =
here so fast I could not believe it! His work is perfect! If you had =
doubts about using him - don't worry - he's super.

73/Tim Logan NZ7C

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---
_______________________________________________
Elecraft mailing list: [email protected]
You must be a list member to post to the list.=20
Postings must be plain text (no HTML or attachments).=20
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com