[Elecraft] K2 drift Mod

[Vic Rosenthal]

Don Brown wrote:
> 
> I don't remember what the drift spec is but removing X2 will improve it by a factor of 2. It also will improve the frequency tracking of the PLL because the swing is smaller for the same number of steps. Just make sure it will swing at least 10 KHz

I've been told on good authority that Elecraft is working on an 'official' mod
to reduce drift in the BFO and the VCO.  It might be worthwhile to wait and see
this before making any mods for this purpose.

Vic K2VCO