[Elecraft] TOOLS

Sun Oct 20 00:45:00 2002

I think you need to double check your link and revise it!

73

Jim W7RY

----- Original Message -----
From: "Don Brown" <[email protected]>
To: "David Schornak" <[email protected]>; "Elecraft"
<[email protected]>
Sent: Saturday, October 19, 2002 3:34 PM
Subject: Re: [Elecraft] TOOLS

> HI
>
> A 50 ohm dummy load is required to complete the kit. You can make one or
buy one. OHR has a nice kit rated at 100 watts. Build it and you will be
ready for the KPA100 if you get that option. They also make a nice QRP
wattmeter kit - the WM-2. I find I use the little wattmeter all the time. It
has 3 ranges 10 watts 1 watt and .1 watt. I feel a good Digital Multimeter
is a requirement to build the K2 although it could be built without it. I
like Fluke meters but some people think they are a little pricy for a hobby.
However they are bulletproof electrically and mechanically and have a
lifetime warranty so I guess you get what you pay for. The one on my bench
is almost 20 years old and still meets specs.
>
> You can get OHR kits from Morse Express www.moresex.com as well as a nice
selection of Morse keys and paddles. The usual disclaimers, I have no
relationship with Fluke, OHR or Morse Express other than a satisfied
customer.
>
> Don Brown
> KD5NDB
>
> ----- Original Message -----
> From: David Schornak
> Sent: Saturday, October 19, 2002 2:58 PM
> To: Elecraft
> Subject: [Elecraft] TOOLS
>
> okay been looking through the manual and was wondering beside the basic
hand tools and soldering station is there any other test equipment or tools
that you need to complete the k2 or could use to do a good job on it.
>
> KG4LSK
> David
>
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment. Attachments are not allowed.
> Please post in Plain-Text only.---
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
>
>
>