[Elecraft] K1 VFO range??

Sun Oct 6 12:12:00 2002

Well I went home and looked at the VFO pot, and low and behold one one the 
wires had broken while installing the face plate. I did not use the 
supplied green wire, but used some other wire I got at RS. So this fixed 
it!! Now getting about 187kHz on the VFO!!..

I also found that I had missed a spot on the earphone plug. So I fixed it 
and now am ready to start the transmiter part..

Thanks for your help Andy,

Denis - KC6AUP

On Fri, 4 Oct 2002, Wallace, Andy wrote:

> For 60 kHz range, the VFO cap is a little yellow guy. For 150
> it's the silver tubular one. You could have a miswired VFO
> pot, too....double check!
> 
> Good luck. The K1 is a heckuva rig!
> -Andy
> 
> > -----Original Message-----
> > From: Denis Dimick [mailto:[email protected]]
> > Sent: Friday, October 04, 2002 3:22 PM
> > To: [email protected]
> > Subject: [Elecraft] K1 VFO range??
> > 
> > 
> > I cant seem to figure this one out.. I installed the proper 
> > christals and 
> > caps to set my VFO to 150Khz, But for some reason I'm only 
> > getting about 
> > 87Khz out of the VFO..
> > 
> > I know someone posted something about this in the last month, 
> > but have not 
> > been able to locate the message/thread in the archives..
> > 
> > Anyone know how to solve this?
> > 
> > Thanks
> > 
> > Denis - KC6AUP
> > 
> > _______________________________________________
> > Elecraft mailing list: [email protected]
> > You must be a list member to post to the list. 
> > Postings must be plain text (no HTML or attachments). 
> > See: http://mailman.qth.net/mailman/listinfo/elecraft
> > Elecraft Web Page: http://www.elecraft.com
> > 
> 