[Elecraft] Re: K2 build question: R1 potentiometer seating

[Wayne Burdick]

Sorry, Brian, the wording in the manual could be improved. It can sit on the
shoulders of the pins.

73,
Wayne
N6KR

Brian Machesney wrote:
> 
> Page 14 of the manual says, "R1 must be seated flat against the board
> before soldering."
> 
> The leads of the pot are too big, near the pot "body," to fit through the
> holes. This prevents seating the pot flat against the board.
> 
> Has anybody dealt with this problem?