[Elecraft] 1N4007 & Ten Tec 1208 xvtr

Tue Nov 26 01:20:00 2002

You can get these from Elecraft, or use an NTE125 as a direct 
replacement..

On Mon, 25 Nov 2002 [email protected] wrote:

> Hi Folks
> Ran into a snag while building the Ten Tec XVTR for use with my K2.
> The Ten Tec 1208 XVTR kit was missing a few Diodes. The kit called for
> 1N4007 diodes used in the 14 mhz Receive Post-amplifier stage and also
> the 50mhz Receive Pre-amplifier stage. From what I could find on line,
> it seems like it may be ok to substitute RadioShack's standard 1KV 2.5
> amp diodes for the 1N4007? (The original kit called for 1N4002's but
> were changed to 1N4007 in the latest revision.) What say you?
> Thanks!
> Paul
> 
> 
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list. 
> Postings must be plain text (no HTML or attachments). 
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
> 