[Elecraft] Re: KAT100-1 Power Up Phenomenon

Sat Nov 23 14:14:01 2002

Roy, as long as the KAT100 is responding to the ANT1/2 switch and the ATU menu
entry, all is well. The LEDs on the KAT100 may initially be set to bright
("DAY") mode, but if you have LCD = NITE in the K2 menu, the K2 will send a
command to the KAT100 to set the LEDs accordingly.

Let me know if you have any other problems.

tnx
Wayne

[email protected] wrote:
> 
> I am powering my K2/100 and the KAT100-1 with the same Astron VS35M power
> supply.  I turn on the power supply first and power is automatically supplied
> to the KAT100-1 at that time.  I then turn on the K2/100 and notice the Power
> Range and Ant LEDs momentarily light up a little brighter for a split second
> and settle down to normal brightness.  I just wonder if this is normal.  Roy
> Morris  W4WFB  K2100 #2225
> 
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment. Attachments are not allowed.
> Please post in Plain-Text only.---
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com

-- 

http://www.elecraft.com