[Elecraft] A "nice-to-have" for the K1/K2...

Fri Nov 15 10:16:08 2002

Hi

The K2 does have J5 AUX AF connector on the RF board. This output could
drive a small board with a buffer amplifier and brought out the back for
line level audio out. Transmit audio could be picked off the SSB board at U3
pin 7 and mixed with the receive audio in the buffer amp for recording both
sides of a QSO or each could be buffered separately and brought out on 2
jacks.

Don Brown
KD5NDB

----- Original Message -----
From: "Peter Halpin" <[email protected]>
To: "James Fonte" <[email protected]>; "Elecraft@Mailman. Qth. Net"
<[email protected]>
Sent: Friday, November 15, 2002 8:36 AM
Subject: RE: [Elecraft] A "nice-to-have" for the K1/K2...

> Hi all,
>
> James asked:
>
> > What do YOU think about the addition of an audio-output port on
> > the rear of  the K1/K2...that provides a standard line-level
> > output...
>
>
> It's an EXCELLENT idea, James. In fact one of the few genuine gripes I
have
> about the K2 is the lack of a fixed-level hi-z output as  standard
> equipment. It makes interfacing for digital modes and audio applications a
> lot simpler. EA3BLQ's interface design is suitable - I have one here - but
a
> direct STANDARD output is a thing greatly to be desired. Thought: as long
as
> it can be retrofitted to K2s without the "scratch pot" mod!
>
> 145, Pete  PE1MHO - G7ECN - M3ECN  K2 #2768
>
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
>