[Elecraft] KAT100 LED assembly

[Wayne Burdick]

Vic,

It's probably easier to stop at the epoxy coating on the leads and not force them down.
Just equalize the height of all of the LEDs if some of them have such a coating.

73,
Wayne
N6KR


Vic Rosenthal wrote:
> 
> The KAT100 manual says the front-panel LEDs must be flat against the board.  The
> leads of the LEDs have little crimps that stop them from being inserted all the
> way.  Is the manual correct and I should force them in all the way (or file the
> crimps), or should I just go as far as the crimp?
> 
> I think they need to go in all the way, but I just want to be sure.
> 
> Vic K2VCO
> _______________________________________________
> Elecraft mailing list: Elecraft@mailman.qth.net
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com

-- 

http://www.elecraft.com