[Elecraft] K2 BFO & PLL Mods - Revised DOCs available

[Tom Hammond NØSS]

Folks:

For those of you who will soon (if not already) receive your kit of parts 
for the K2 BFO & PLL mods, please note that there were two steps (the 
installation of R19 and then the soldering of R116) missing from the 
printed documentation which were mailed with the mod kit.

There is an UPDATED set of installation docs available at:

    http://www.qsl.net/n0ss/

Normally these would have been posted by Eric to the Elecraft website (and 
they eventually will be), but it appears that Eric's out of the office 
today and can't post the update until probably Monday (Nov 11th).

Since I am to blame for these errors (I compiled the instructions and drew 
some of the illustrations), I felt it necessary to mitigate the questions 
as soon as possible. So, to get the revised docs out to you as soon as 
possible (and this HAS been approved by Wayne), I've placed them on my web 
site at the link shown above.

Note that there is NOTHING which would have been damaged by the missing 
steps. It's just that things weren't quite 'complete'.

Sorry for any problems this might cause anyone.

73,

Tom Hammond   N0SS