[Elecraft] [Fwd: Pout on 20] Correction

[Dan Dantzler]

In my previous posting, I said my K-2 was working properly before I
built and installed the K-2. Obviously this was and error. I meant to
say the K-2 was working properly and I recently built and installed the
KAT-2 auto tuner!
To restate, my power output was fine on all bands before I built the
auto tuner. I think it was OK after I built and installed the tuner but
I'm not absolutly sure. Now, however, power out is fine on all band
except 20 where it does not go above 3 watts no matter wher the power
knob is set.
Thanks in advance for any help and sorry for the extra bandwidth caused
by the error> :-(

73
Dan
W0JMP


--- StripMime Report -- processed MIME parts ---
multipart/mixed
  text/plain (text body -- kept)
  message/rfc822
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---