[Elecraft] SN# 2602 (Alignment & Test part 1)

[Mike McCoy]

aHA!  Just from memory, without even looking I'm almost positive that's the
problem!

Thanks!


> Mike:
>
> Check to confirm that you have the plug where the FCRT probe connects to
> the Control Board wires properly. It sounds as though you may have the two
> pins swapped and that the center conductor is GROUNDED while the shield
> thinks it's the hot lead.
>
> Shield goes to the pin whic is closest to the edge of the PC board.
>
> Tom Hammond   N0SS
>