[Elecraft] K1 #1149

Wed May 1 18:19:02 2002

What is the supply voltage?  With 13.6 volts, mine will do 6-7 watts into 50 ohms.
I suspect that maybe the alignment of the filter board might not be right.  Try
limiting the power to 1.5 watts in the "Out" menu item, do the alignment
of the trimmers several times until no improvement results.  Towards the last
2-3 tries, "unkey" the radio to reset the ALC and rekey again between alignment
tries.  Let us know what happens.
73,
Sandy W5TVW
----- Original Message -----
From: "John Dziedziejko" <[email protected]>
To: <[email protected]>
Sent: Wednesday, May 01, 2002 4:16 PM
Subject: [Elecraft] K1 #1149

| Hi Everyone:
|
| Glad to say that my kit building is still up to par and the new K1 works with no
problems. The alignment for receive and transmit was easy.
|
| I do have one question. I am getting only about 4 watts into a 50 ohm dummy load on
all 4 bands. Is this about average or can I tweak something to get it up to 5 watts?
|
| Love the radio.
|
| 73's
|
| John  W9QP
|
|
| --- StripMime Report -- processed MIME parts ---
| multipart/alternative
|   text/plain (text body -- kept)
|   text/html
| The reason this message is shown is because the post was in HTML
| or had an attachment. Attachments are not allowed.
| Please post in Plain-Text only.---
| _______________________________________________
| Elecraft mailing list: [email protected]
| You must be a list member to post to the list.
| Postings must be plain text (no HTML or attachments).
| See: http://mailman.qth.net/mailman/listinfo/elecraft
| Elecraft Web Page: http://www.elecraft.com
|
|