[Elecraft] Info on "revised" K1 -- details

[Wayne Burdick]

Mike, 

You'll find the details you asked for (below). Thanks for your comments
on the K1.

73,
Wayne

* * *

VFO Linearization: 

   Add a 100 k resistor (R19) from pin 1 to pin 2 of the VFO pot pads (R1)
   on the Front Panel board. No temperature compensation components have
been added.

Attenuator on/off audio "pop" elimination:

   Install miniatore 10 or 15 uH RF choke between pins 3 and 8 of relay K1
   on the bottom of the RF board.