[Elecraft] Alignment and Test, Part 1

[Phil Wheeler]

Next time, drink the beer cold instead of boiling it, Pete :-:

Phil

pgerba wrote:

>Dear Fellow Crafters;
>
>Well Here's the story:
>
>The problem was most likely caused by beer fumes..
>
>Beyond that, I decided late one evening, while finishing up the front panel
>board, to mod the board for 
>"Builder Alert #16".  Problem was, that I installed the called for jumper
>one row to the right of pins 11 & 14 (7 & 10). 
>
>The result was as described in my quest for K2 elightenment.  
>
>So, if you're looking at the results of doing the mod for "#16" and "ELE"
>shows on the display and the panel keys 
>are kaput , finish the beer, sit in the sun for a while (or take a nap);
>then after a cup of joe, have a look at the jumper 
>you installed on the back of U3.
>
>Until the next mistake,
>
>Thanks again for the help.
>
>pete, kn6bi
>