[Elecraft] K1 Owner's manual-chapter 7. Align and test, Pt 1;p. 37 (keyer)

Sun Mar 3 00:35:01 2002

Charlie
To simulate a set of paddles for testing, get a stereo plug and solder three
wires to it--tip, ring and sleeve.  That gives you a dit, dah and gnd
contact.  Shorting the dit lead to ground should give you dits, and shorting
the dah lead to  ground should give you dahs.  Wouldn't want to operate this
way, but it's fine for testing.
73, Bob N6WG

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of Charles L. Gardner,
Jr.
Sent: Saturday, March 02, 2002 5:47 PM
To: Elecraft
Subject: [Elecraft] K1 Owner's manual-chapter 7. Align and test, Pt 1;p.
37 (keyer)

I only have a "straight Key" at this point to test with. I don't have a
paddle keyer. I can't get this section to work. I may have miswired
anything (ex. the straight key in to the "stereo (2 circuit) plug.
Several of the steps seem to work, but I get "no" "dots and dashes"
through to my earphones.

Any suggestions please.

73  Charlie Gardner WA4HKN
Lexington, KY
K1-4  #1074.

_______________________________________________
Elecraft mailing list: [email protected]
You must be a list member to post to the list.
Postings must be plain text (no HTML or attachments).
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com